When it comes to urban areas, Pac-Mac makes it easy!
Select a point to see more about Pac-Mac world-class engineered trucks.
66″ hopper widthRear strobesWork lights optionSmart lights optionInterchangeable cushioned cylindersSingle tipper optionalAll pin joints and bushings are heat treatedWide-open designAll LED lightingOptional Hyper-hopperSimple controls
Bolt-on FendersEasy Valve AccessCurbside E-Stop30 gal Hydraulic tank with temperature and sight gaugeDual Side Driver AlertAutomatic latchesAdjustable Rider Steps
Data & Specifications
RL 6
Model
Capacity
6 cy
Hopper capacity
1 yd3
Body weight (body shell only)
2,537 lb
Body weight (complete unit, less options)
7, 235 lb
Hopper inside width
66.3″
Body Specifications
Sidewalls (curved shell)
10 ga high tensile steel
Floor (single sheet, flat)
7 ga high tensile steel
Roof (curved shell)
10 ga high tensile steel
Ejection panel face
10 ga high tensile steel
Hopper
3/16″ 100 ksi T-1 (1/4″ T-1 option)
Packer panel face
3/16″ T-1 steel
Slide panel face
3/16″ high tensile steel
Hopper sides
3/16″ T-1 steel (lower tailgate);
10 ga high tensile steel (upper tailgate)
Hydraulic System
Cylinder
Ejector: Single-stage 4.5″ bore
Tailgate: (2) 3.5″ bore; 2″ rod; 20″ stroke
Slide: (2) 3.5″ bore; 2″ rod; 19″ stroke
Packer: (2) 3.5″ bore; 2″ rod; 19″ stroke
Valves
Shutoff: Ball
Packing controls: Sectional spool
Ejector/tailgate raise: Sectional spool
Operating pressure in PSI
2,400
Maximum operating pressure
2,700
Gallons per minute (GPM)
21 GPM
Reservoir
30 gal.…
When it comes to Rear Loaders, Pac-Mac eats the competition!
Select a point to see more about Pac-Mac world-class engineered trucks.
Full size access doorAccess stepsBolt-On FendersAutomatic LatchesDual Side E-StopsDual Side Driver AlertAdjustable Rider Steps
Easy valve access for service abilityFront StrobesUp to 1,000 lb / cu. yd50 gal Hydraulic tank with temperature and sight gauge
Rear strobesSmart lights optionWork lights optionInterchangeable cushioned cylindersAll pin joints and bushings are heat treated80″ Hopper WidthWide-open designSingle or Dual TippersAll LED LightingSimple Controls
Data & Specifications
RL 6
Model
Capacity
6 cy
Hopper capacity
1 yd3
Body weight (body shell only)
2,537 lb
Body weight (complete unit, less options)
7, 235 lb
Hopper inside width
66.3″
Body Specifications
Sidewalls (curved shell)
10 ga high tensile steel
Floor (single sheet, flat)
7 ga high tensile steel
Roof (curved shell)
10 ga high tensile steel
Ejection panel face
10 ga high tensile steel
Hopper
3/16″ 100 ksi T-1 (1/4″ T-1 option)
Packer panel face
3/16″ T-1 steel
Slide panel face
3/16″ high tensile steel
Hopper sides
3/16″ T-1 steel (lower tailgate);
10 ga high tensile steel (upper tailgate)
Hydraulic System
Cylinder
Ejector: Single-stage 4.5″ bore
Tailgate: (2) 3.5″ bore; 2″ rod; 20″ stroke
Slide: (2) 3.5″ bore; 2″ rod; 19″ stroke
Packer: (2) 3.5″ bore; 2″ rod; 19″ stroke
Valves
Shutoff: Ball
Packing controls: Sectional spool
Ejector/tailgate raise: Sectional spool
Operating pressure in PSI
2,400
Maximum operating pressure
2,700
Gallons per minute (GPM)
21 GPM
Reservoir
30 gal.…
When it comes to Rear Loaders, Pac-Mac eats the competition!
Select a point to see more about Pac-Mac world-class engineered trucks.
Full size access doorAccess stepsBolt-On FendersAutomatic LatchesCurbside E-stop. (Dual sides optional)Dual Side Driver AlertAdjustable Rider Steps
Easy valve access for service abilityFront StrobesUp to 1,000 lb/cu. Yd.50 gal Hydraulic tank with temperature and sight gauge
Rear strobesSmart lights optionWork lights optionCushioned cylindersAll pin joints and bushings are heat treated80″ Hopper WidthWide-open designSingle or Dual TippersAll LED LightingSimple Controls
Data & Specifications
RL 6
Model
Capacity
6 cy
Hopper capacity
1 yd3
Body weight (body shell only)
2,537 lb
Body weight (complete unit, less options)
7, 235 lb
Hopper inside width
66.3″
Body Specifications
Sidewalls (curved shell)
10 ga high tensile steel
Floor (single sheet, flat)
7 ga high tensile steel
Roof (curved shell)
10 ga high tensile steel
Ejection panel face
10 ga high tensile steel
Hopper
3/16″ 100 ksi T-1 (1/4″ T-1 option)
Packer panel face
3/16″ T-1 steel
Slide panel face
3/16″ high tensile steel
Hopper sides
3/16″ T-1 steel (lower tailgate);
10 ga high tensile steel (upper tailgate)
Hydraulic System
Cylinder
Ejector: Single-stage 4.5″ bore
Tailgate: (2) 3.5″ bore; 2″ rod; 20″ stroke
Slide: (2) 3.5″ bore; 2″ rod; 19″ stroke
Packer: (2) 3.5″ bore; 2″ rod; 19″ stroke
Valves
Shutoff: Ball
Packing controls: Sectional spool
Ejector/tailgate raise: Sectional spool
Operating pressure in PSI
2,400
Maximum operating pressure
2,700
Gallons per minute (GPM)
21 GPM
Reservoir
30 gal.…
