When it comes to Roll-Offs, Pac-Mac steamrolls the competition!
Select a point to see more about Pac-Mac world-class engineered trucks.
Data & Specifications
Roll-Off
Specifications
Hoist Rated Capacity
- 60,000 lbs.
Main Frame
- 8 in. x 4 in. x 1/2 in. A500 C Tubing
Sub Frame
- 4 in. x 2 in. x 1/4 in. A500 C Tubing
Front Stop
- 1-1/2 in. plate
Container Lock
- Automatic spring loaded
Lift Cylinder Pins
- 2-1/2 in. solid
Rear Hinge Pins
- 3 in. solid
Cable
- 7/8 in.
Cable Sheaves
- 10 in. O.D. bronze-bushed 2.5 in. I.D.
Cable Anchor
- 4 forged cable clamps
Cable End
- Steel casting
Rear Hold Down
- 1 in. plate located for standard containers
Middle Hold Down
- 3/4 in. plate
Lift Cylinders
- 6 in. x 72 in. double acting
Reeving Cylinders
- 7 in. x 79.5 in. double acting
Direct Mount Pump
- Gear type 35 GPM at 1500 RPM
Operating Pressure
- 1850 PSI
Hydraulic Valve
- 2 spool 45 GPM or 5 spool for use with tarper
Inside Controls
- Swing-away console with pneumatic levers
Hoist-Up Alarm
- Hi-lo audible alarm at rear
- Flashing red lamp and buzzer in cab
Hydraulic Reservoir
- 50 gal. behind cab
Filtration
- 10-micron filter, 100 mesh suction screen, 10-micron breather
Outside Rollers
- 4 in. O.D. double shear with bronze bushing and replaceable pins
Maintenance Props
- Two, integrated
I.C.C. Bumper
- Mechanical forward-folding. Stowable for trailer clearance.
Container Length
- Up to 22 in.
Approximate Weight
- 6,700 lbs. (Hoist only, without options)
standard features
- Hoist
- 60,000 lbs. capacity
- For outside rail containers up to 22 ft. long and 8 ft. tall
- Hol-Mac reverse mounted 6 in. lift cylinders.
7 in. reeving cylinders – Made in the USA - Sleeved hoses for protection
- Rigid rear container hold downs
- Sliding rear strap winch hold downs
- Steel line plumbing reduces rubber hoses to a minimum *Patent Pending
- 10 in. cable sheaves with 2 1/2 in. pins
- 4 in. diameter double-shear heavy-duty side rollers with replaceable pins
- Auto forward-holding mechanical ICC bumper. Stowable for trailering.
- Pintle-ready hitch rear attachment point
- Heavy-duty cable end storage
- Bolt-on replaceable steel fenders and tarper system *Patent Pending
- Replaceable bolt-on 8 in. wide x 1/2 in. thick rear sheave guards
- 49° tilt angle
- All lube fittings are accessible from ground level
- Wiring runs through a full-length steel conduit
- Controls
- Spin-on filter, spin-on breather, and sight glass with temperature gauge
- Sectional manual control valve outside of the cab
- Hoist controls inside the cab on a swing-away control tower *Patent Pending
- Hydraulics
- Hydraulic tank located back of cab for improved cooling, improved supply to pump, and stays cleaner
- Hydraulic pressure gauge
- Safety
- ANSI Z-245 compliance
- Automatic roller lock
- Dual safety props for maintenance
- Dual tone backup alarm and hoist-up alarm with a signal light in cab
- D.O.T. approved recessed L.E.D. lighting and reflectors
- Bumper meets D.O.T. rear impact standards
- Mid-body L.E.D. turn signals
- High-mounted license plate bracket
- Mud flaps on front and rear
- Rear camera guard
Optional Equipment
- Integrated arm-type tarper
- Fold-down auxiliary front stops for short containers
- Two work lights mounted on rear light boxes
- Steel toolbox 18 in. x 18 in. x 48 in. left, right, or both
- Bolt-on on-board scale kit. No modifications required
- Rear camera
- On-board scale system printer
All design, specifications, and components are subject to change at the manufacturer’s sole discretion at any time without notice. Data published herein is for information purposes only and shall not be construed to warrant suitability of the unit for any particular purpose, as performance may vary with the conditions encountered. The only warranty is our standard written warranty for this product at the time of shipment.
Ready for your Pac-Mac?
Contact Pac-Mac to find your dealer.
