Rear Loaders

RLM Series Refuse Truck

The RLM Series is Pac-Mac’s medium size rear loader. This unit is available in 11, 13, 16 cubic yards with a compaction rate of 800-900 lbs/yd. Our rear loader truck is engineered using the most advanced computer modeling systems, proving that Pac-Mac is committed to providing the highest quality products in the solid waste industry.

Data & Specifications

RLM 11

Model

Capacity

  • 11 yd3

Hopper Capacity

  • 2.6 yd3

Body Weight (Body Shell Only)

  • 3,187 lb

Body Weight (Complete Unit)

  • 10,320 lb

Hopper Inside Width

  • 80″

Body Construction Specifications

Sidewalls (curved shell)

  • 11 ga high tensile steel

Floor (single sheet, flat)

  • 3/16″ high tensile steel

Roof (curved shell)

  • 11 ga high tensile steel

Ejection Panel Face

  • 11 ga high tensile steel

Hopper

  • 1/4″ 100 ksi T-1

Packer Panel Face

  • 3/16″ 100,000 PSI (T-1)

Slide Panel Face

  • 3/16″ high tensile steel

Hopper Sides

  • 3/16″ T-1 steel (lower tailgate);
    10 ga high tensile steel (upper tailgate)

Hydraulic System

Cylinder

  • Ejector: (1) Multi-stage 5.5″ bore
  • Tailgate: (2) 3″ bore; 1.75″ rod; 30.5″ stroke
  • Slide: (2) 4.5″ bore; 3.5″ rod; 27″ stroke
  • Packer: (2) 4.5″ bore; 3.5″ rod; 27″ stroke

Valves

  • Shutoff: Ball
  • Packing Controls: Sectional Spool
  • Ejector/Tailgate Raise: Sectional Spool

Operating Pressure in PSI

  • 2,200

Maximum Operating Pressure

  • 2,400

Gallons Per Minute (GPM)

  • 35-38 GPM

Reservoir

  • 50 gal.

Packing Cycle Time

  • Complete: 17-19 sec
  • Reload 3 sec

Compaction Rate in Lbs./Yard

  • 800-900

Chassis Requirements

Minimum GVWR

  • 29,000 lb

Minimum GAWR

  • Front Axle: 8,000
  • Rear Axle: 21,000

Usable CA (+/- 2 in.)

  • 112″

Minimum After Frame

  • 34″

RLM 13

Model

Capacity

  • 13 yd3

Hopper Capacity

  • 2.6 yd3

Body Weight (Body Shell Only)

  • 3,396 lb

Body Weight (Complete Unit)

  • 10,530 lb

Hopper Inside Width

  • 80″

Body Construction Specifications

Sidewalls (curved shell)

  • 11 ga high tensile steel

Floor (single sheet, flat)

  • 3/16″ high tensile steel

Roof (curved shell)

  • 11 ga high tensile steel

Ejection Panel Face

  • 11 ga high tensile steel

Hopper

  • 3/16″ 100 ksi T-1 (1/4″ T-1 option)

Packer Panel Face

  • 3/16″ 100,000 PSI (T-1)

Slide Panel Face

  • 3/16″ high tensile steel

Hopper Sides

  • 3/16″ T-1 steel (lower tailgate);
    10 ga high tensile steel (upper tailgate)

Hydraulic System

Cylinder

  • Ejector: (1) Multi-stage 5.5″ bore
  • Tailgate: (2) 3″ bore; 1.75″ rod; 30.5″ stroke
  • Slide: (2) 4.5″ bore; 3.5″ rod; 27″ stroke
  • Packer: (2) 4.5″ bore; 3.5″ rod; 27″ stroke

Valves

  • Shutoff: Ball
  • Packing Controls: Sectional Spool
  • Ejector/Tailgate Raise: Sectional Spool

Operating Pressure in PSI

  • 2,200

Maximum Operating Pressure

  • 2,400

Gallons Per Minute (GPM)

  • 35-38 GPM

Reservoir

  • 50 gal.

Packing Cycle Time

  • Complete: 17-19 sec
  • Reload 3 sec

Compaction Rate in Lbs./Yard

  • 800-900

Chassis Requirements

Minimum GVWR

  • 33,000 lbs

Minimum GAWR

  • Front Axle: 10,000
  • Rear Axle: 23,000

Usable CA (+/- 2 in.)

  • 128″

Minimum After Frame

  • 34″

RLM 16

Model

Capacity

  • 16 yd3

Hopper Capacity

  • 2.6 yd3

Body Weight (Body Shell Only)

  • 3,709 lb

Body Weight (Complete Unit)

  • 10,850 lb

Hopper Inside Width

  • 80″

Body Construction Specifications

Sidewalls (curved shell)

  • 11 ga high tensile steel

Floor (single sheet, flat)

  • 3/16″ high tensile steel

Roof (curved shell)

  • 11 ga high tensile steel

Ejection Panel Face

  • 11 ga high tensile steel

Hopper

  • 3/16″ 100 ksi T-1 (1/4″ T-1 option)

Packer Panel Face

  • 3/16″ 100,000 PSI (T-1)

Slide Panel Face

  • 3/16″ high tensile steel

Hopper Sides

  • 3/16″ T-1 steel (lower tailgate);
    10 ga high tensile steel (upper tailgate)

Hydraulic System

Cylinder

  • Ejector: (1) Multi-stage 5.5″ bore
  • Tailgate: (2) 3″ bore; 1.75″ rod; 30.5″ stroke
  • Slide: (2) 4.5″ bore; 3.5″ rod; 27″ stroke
  • Packer: (2) 4.5″ bore; 3.5″ rod; 27″ stroke

Valves

  • Shutoff: Ball
  • Packing Controls: Sectional Spool
  • Ejector/Tailgate Raise: Sectional Spool

Operating Pressure in PSI

  • 2,200

Maximum Operating Pressure

  • 2,400

Gallons Per Minute (GPM)

  • 35-38 GPM

Reservoir

  • 50 gal.

Packing Cycle Time

  • Complete: 17-19 sec
  • Reload 3 sec

Compaction Rate in Lbs./Yard

  • 800-900

Chassis Requirements

Minimum GVWR

  • 33,000 lbs

Minimum GAWR

  • Front Axle: 10,000
  • Rear Axle: 23,000

Usable CA (+/- 2 in.)

  • 153″

Minimum After Frame

  • 34″

Standard Features

  • One piece flat floor
  • Curved shell body
  • Fast cycle time
  • Meets or exceeds ANSI standards
  • Wide open accessibility for cleaning and maintenance
  • Automatic latches and integrated tailgate props
  • The industry’s highest standard for hydraulic cleanliness
  • LED lighting, weatherproof connections and braided loom
  • Dual Amber oval rear strobes
  • Heat-treated pins and replaceable bushings throughout
  • Large access door with safety interlock
  • Emergency stop on curb side
  • Driver alert buttons on both sides
  • Sectional valves

Optional Equipment

  • Single or dual cart tippers
  • Reeving system: 15K cylinder
  • Kick bar and container latches (38” minimum chassis height only)
  • Front-mounted pump
  • Amber or clear beacon rear strobes (single or dual)
  • Amber oval flush mount strobes (front and/or rear)
  • Smart light strobe system (may be combined with amber ovals)
  • Rear vision camera
  • Work lights over hopper and tailgate sides
  • Frame mounted water cooler
  • Frame mounted tool box
  • Tool holder
  • Emergency stop on street side
  • Pressure gauge
  • Limb guard

All design, specifications, and components are subject to change at the manufacturer’s sole discretion at any time without notice. Data published herein is for information purposes only and shall not be construed to warrant suitability of the unit for any particular purpose, as performance may vary with the conditions encountered. The only warranty is our standard written warranty for this product at the time of shipment.

Ready for your Pac-Mac?

Contact Pac-Mac to find your dealer.

RLX Series Refuse Truck